Topology: ONT to Actiontec via RG45 into WAN port. Verizon coax to splitter. From splitter to Actiontec and to STB, STB guides on TV all work. Actiontec in DHCP mode. Then ActionTec LAN to home network.
Gateway G1100 set up as static IP. Network RG45 into LAN port of G1100. DHCP off. 2.4G and 5G on. Wifi devices connect to internet ok. Red light on Internet LED.
When I connect a wireless device to the Gateway G1100 Guest Network, it connects and gets an IP 192.168.200.x but with no internet. Most of my Wi-Fi devices, have static IPs with gateway IPs set as the ActionTec IP and DNS set for 8.8.8.8. Couple of Wi-Fi devices get their IP via the Actiontec with DNS set as 8.8.8.8
Network connections on G1100:
Network(Home/Office)
Broadband ; Cable disconnected
5G, 2.4G and Ethernet all status connected.
I really want to use the Guest Network for visitors but can’t seem to get internet connection. I have tried multiple times to enable the broadband connection on the G1100 with no avail. Have tried multiple ways to engage the broadband network, then placing the RG45 into the WAN port after power cycle to no avail.
Any suggestions?