Hi and thanks for reading,
I have a 20 camera home security set-up using a DLINK router and a non standard IP addressing setup.
I set up the DLINK with the cams on 192.168.7.100 to less than 7.254 (static, naturaly) and forwarded the 20 ports out and open on/to the net for remote monitoring.
I been running this way for almost 10 years but the old DLINK router can't do n or ac and is getting erratic on g...
Now Verizon wanted my old Actiontec router back and gave me the G1100.
I need to figure out where (in the G1100 menu tree) re-set it to 192.168.7.1 - 192.168.7.254 (as opposed to the 192.168.1.1 - 192.168.1.254 default.) Then I need to open these 20 ports up on the G1100.
OK, I feel stupid for not being able to use my memory of setting up the DLINK router and getting it off its same default of "1.1 - 1.254" range up to the "x.1 - x.254" range. The G1100 menu tree is very confusing to me.
If I can make the switch, none of the cameras will need to be touched.
Will someone please help me with this?
"outsider" looking in.