Wondering if anyone has experienced an issue where the Quantum G1100 Gateway enters an indefinite boot loop. Plugged in the Quantum gateway for the first time in maybe a year, pulled an IP from Verizon, made sure network was up, etc. Decided to move the wall plug to a different outlet and now the gateway is in a endless boot loop. Internet (globe) light flashes white 3 times, then solid red for 10 seconds, rinse repeat. Noted that the LAN lights will all illuminate on the back arbitrarily during this sequence. Also noted that when a ethernet cable is plugged into one of the LAN ports, the network adapter in Windows will cycle between "Identifying" and "Network cable unplugged". Have tried the WPS reset and factory reset button on the back. Have held each for both the recommended 10 seconds and longer. Have also unplugged the power and let it sit. Appears the device may be bricked. Thinking the gateway was pulling and applying a firmware update when I yanked the power. Anyone ever encountered this?
↧